Tube End Closure Instrumentation Fitting
Product Description
SS S30403 Tube End Closure Fitting, Cupro Nickel Tube End Closure, DIN 2.4816 Tube End Closure, UNS S30400 Tube End Closure, Stainless Steel 1.4401 Tube End Closure Fittings, DIN 1.4301 Tube End Closure, SS 304 Tube End Closure, UNS N04400 Tube End Closure, Monel Tube End Closure, SS 316 Tube End Closure Leading Manufacturers.
L. V. Overseas is the largest firm catering all the needs of customers regarding Tube End Closure. We supply these in various sizes, standards, materials, specifications and custom dimensions. We also facilitate customers with quality test reports that prove quality.
Tube End Closure has a unique three-piece design having a body, with as hardened ferrule and nut. Unlike traditional compression joint, this nut is screwed on to the body. This ferrule grips the pipe in position and perceptibly holds the pipe surface to provide a positive seal. When it is fully tightened ferrule is distorted slightly in the middle sections and acts as a spring. The spring action of ferrule control tension between the body and nut to prevent it from loosen due to the strain or vibration.
Typical Applications
-
food and food processing industries.
-
sewage and water treatment plants.
-
risers for oil platforms and pipelines.
-
ships and marine equipment.
-
pharmaceutical industry.
Weldability
Good
Availability
Key features
-
Nice corrosion resistance
-
Good abrasion resistance
-
Low magnetism
-
Long working life
Corrosion Resistance
Very Good
Machinability
Good / fair.
Tube End Closure Instrumentation Fitting specifications
Pressure Ratings : Up to 11 000 psig (760 bar),
Medium-Pressure – Up to 20 000 psig (1378 bar)
High-Pressure – Up to 60 000 psig (4134 bar).
Types : NPT, ISO/BP, SAE/MS, AN, weld ends
Sizes : 1/16 to 2 in.; 2 to 50 mm,
Medium-Pressure – 1/4, 3/8, 1/2, 9/16, 3/4, 1 in.; 6, 10, 12 mm
High-Pressure – 1/8 to 9/16 in.
Temperature Ratings : Up to 1000°F (537°C)
Chemical Composition (weight %)
| C | Si | Mn | P | S | Tensile strength kg/mm² |
Yield point kg/mm² |
Elongation% |
| 0.25 or less |
0.35 or less |
0.30 0.90 |
0.040 or less |
0.040 or less |
52 up | 39 up | 15 up |
| 38 up | 22 up | 30 up |
Mechanical Properties
| Grades | Delivery Conditions | Tensile Strength Rm (Mpa) | Elongation in the longitudinal direction Al (%) |
| St 45 | +A (GBK) | 390 min | 21 min |
| St 52 | +A (GBK) | 490 min | 22 min |
| E355 | +A (GBK) | 450 min | 22 min |
| 1020 | +A (GBK) | 390 min | 21 min |