Pipe End Cap

Products

Product Description

A buttweld cap is a sort of pipe fitting which covers the end of a tube. As it may have female threads, then it can twist into the end of this tube. Additionally, it may be welded on to near the conclusion of the pipe. On a weld, even if it’s a temporary near, or the builder would like to increase the piping system, later on, they should allow extra pipe before closure so that the pipe cap may be cut off along with the pipe system long as necessary. This way, you won’t need less pipe in case you require it, and the brand new fitting could be attached properly

Typical Applications

  • food and food processing industries.

  • sewage and water treatment plants.

  • risers for oil platforms and pipelines.

  • ships and marine equipment.

  • pharmaceutical industry.

Weldability

Good 

Pipe End Cap specifications

Standard – ANSI/ASME :ASTM A403 / ASME SA403, ANSI B16.9, ASME B16.25, ASME B16.28, MSS SP-43.

DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011

EN : EN10253-1, EN10253-2

Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS

Type : Seamless / ERW / Welded / Fabricated

Size: 1/2″ (15 NB) to 48″ (1200NB)

Form: End Caps

Availability

ASTM A403 WP316/316L, ASTM A403 WP304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L

Key features

    • There are cost savings to be made since each end cap can be re-used multiple times.

    • Easy and quick installation and removal by a single person as shown in the short video above.

    • No tools required for cap installation and removal.

    • Our range can also be used on flanged pipe.

Cut to size capability

We can cut from one off blanks to the largest production run for immediate or just in time deliveries.

Corrosion Resistance

Very Good 

Machinability

Good / fair.

Chemical Composition (weight %)

C Si Mn P S Tensile strength
kg/mm²		 Yield point
kg/mm²		 Elongation%
0.25
or
less		 0.35
or
less		 0.30
0.90		 0.040
or
less		 0.040
or
less		 52 up 39 up 15 up
38 up 22 up 30 up

Mechanical Properties

Grades Delivery Conditions Tensile Strength Rm (Mpa) Elongation in the longitudinal direction Al (%)
St 45 +A (GBK) 390 min 21 min
St 52 +A (GBK) 490 min 22 min
E355 +A (GBK) 450 min 22 min
1020 +A (GBK) 390 min 21 min

All information in our datasheet is based on approximate testing and is stated to the best of our knowledge and belief. It is presented apart from contractual obligations and does not constitute any guarantee of properties or of processing or application possibilities in individual cases. Our
warranties and liabilities are stated exclusively in our terms of trading.