Long & Short Bend

Products

Product Description

Long Bend & Short Bend ManufacturerStainless Steel Buttweld Long Radius Bend Manufacturer, ASTM A403 Buttweld 3D Pipe Bend, Steel Buttweld 3D Pipe Bend Suppliers in India, Duplex 5D Bend Manufacturer, Carbon Steel Buttweld Pipe Bend Exporter in Qatar, ASME B16.9 Buttweld LR Bend Stock Holder, Alloy Steel Bend Manufacturers, Monel Buttweld Long Radius Bend Manufacturers.

Typical Applications

    • Chemical

    • Petrochemical

    • Refineries

    • Fertilizers

    • Power Plant

    • Nuclear Power

Weldability

Good 

Long & Short Bend specifications

Standards: ASME / ANSI – B 16.9, ASTM A403 – ASME SA403, ASME B16.9, ASME B16.25, ASME B16.28, MSS SP-43.

Thickness: Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.

Type: Seamless / ERW / Welded / Fabricated

Form: R=1D, 1.5D, 2D, 3D, 5D, 6D, 8D, 10D or Piggable Bend, Hot Bend, Long Radius Bend, Induction Bend

Our Butt weld Pipe Bends conforms to NACE MR0175/ISO 15156

Availability

ASTM A403 WP 304 / 304L / 304H / 309 / 310 / 310s / 316 / 316L / 316Ti 321 / 321H / 347 / 347H / 904L,

Key features

    1. Elbow is a standard fitting but the bends are custom fabricated.

    2. All elbows are bends but all bends are not elbows.

    3. Bend has a larger radius than elbows.

    4. Long radius elbows give less frictional resistance to the fluid than short elbows.

    5. Long radius elbows create lesser pressure drop than short radius elbows.

    6. Short radius is less costly than long radius elbows.

Cut to size capability

We can cut from one off blanks to the largest production run for immediate or just in time deliveries.

Corrosion Resistance

Very Good 

Machinability

Good / fair.

Chemical Composition (weight %)

C Si Mn P S Tensile strength
kg/mm²		 Yield point
kg/mm²		 Elongation%
0.25
or
less		 0.35
or
less		 0.30
0.90		 0.040
or
less		 0.040
or
less		 52 up 39 up 15 up
38 up 22 up 30 up

Mechanical Properties

Grades Delivery Conditions Tensile Strength Rm (Mpa) Elongation in the longitudinal direction Al (%)
St 45 +A (GBK) 390 min 21 min
St 52 +A (GBK) 490 min 22 min
E355 +A (GBK) 450 min 22 min
1020 +A (GBK) 390 min 21 min

All information in our datasheet is based on approximate testing and is stated to the best of our knowledge and belief. It is presented apart from contractual obligations and does not constitute any guarantee of properties or of processing or application possibilities in individual cases. Our
warranties and liabilities are stated exclusively in our terms of trading.