Inconel Sheets, Plates & Coils

Products
stee-sheet-plate-1

Product Description

The Inconel Sheets plate’s coils are nickel-chrome aluminum with a high initial strength that stands out in different temperature ranges and extreme pressure. It can even work in tough environments and conditions where aluminum would simply succumb or creep. When thermal conditions are induced the product successfully sustains as it retains strength. In addition to Ti and Aluminum, the hardened precipitations provide rupture and creeping strengths so as to bear a temperature of approximately 700 degrees C or 1290⁰ F. The sheet plates are made of an alloy of nickel-chromium with marvelous properties.

The sheet plates are used in industries with elevated temperatures and are repelled to stress corrosion and cracking. Since it exhibits relaxation resistance properties; they are useful for temperature bolts. There are certain areas in industries with an oxidizing environment that need special sheets plates and coils. The sheet or plates has a thickness of 1.0-200 mm with good length and width. 

Typical Applications

Oil & Gas Industry

Petrochemicals Plants

Chemical Plants

Industrial Machinery

Power Industry

Paper & Pulp Industry

Food Processing Industry

Refineries

Weldability

Good 

Related material specifications

Standard: ASTM, ASME 

Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm

Thickness : 1.0mm – 50 mm

Production : Hot-Rolled (HR) / Cold-Rolled (CR)

Grade :X-750 UNS (N07750), DIN (2.4669)

Availability

Inconel 600 | Inconel 625 | Inconel718 | Inconel X750 | Inconel 800 | Inconel800HT | Inconel 825

Key features

Temperature resistance

Natural heat protection

Corrosion resistance

High mechanical strength

Cut to size capability

We can cut from one off blanks to the largest production run for immediate or just in time deliveries.

Corrosion Resistance

Very Good 

Machinability

Good / fair.

Chemical Composition (weight %)

Grade C Mn Si S Cu Fe Ni Cr
600 0.15 max 1.00 max 0.50 max 0.015 max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00
625 0.10 max 0.50 max 0.50 max 0.015 max – 5.0 max 58.0 min 20.0 – 23.0
718 0.08 max 0.35 max 0.35 max 0.015 max 0.30 max – 50.00 – 55.00 17.00 – 21.00
x750 0.08 max 1.0 max 0.5 max 0.50 max 0.50 max 5.0-9.0 70.0 min 14.0-17.0

All information in our datasheet is based on approximate testing and is stated to the best of our knowledge and belief. It is presented apart from contractual obligations and does not constitute any guarantee of properties or of processing or application possibilities in individual cases.