Gate valves are primarily designed to start or stop the flow, and when a straight-line flow of fluid and minimum flow restrictions are needed. In service, these valves generally are either fully open or fully closed.
The disk of a Gate valve is completely removed when the valve is fully open; the disk is fully drawn up into the valve Bonnet. This leaves an opening for flow through the valve at the same inside diameter as the pipe system in which the valve is installed. A Gate valve can be used for a wide range of liquids and provides a tight seal when closed

• oil

• gas industry

• pharmaceuticals

• manufacturing

• automotive

• marine

Good 

By wedge: parallel gate valves and wedge gate valves
By seat: metal seat or resilient seated gate valves
By stem: with rising or non-rising stem.

SS 316, SS 304, SS 316 TI, COPPER, BRASS, DUPLEX, CS, INCONEL, SUPER DUPLEX, HASTELLOY, MONEL, ALLOY 20, SMO 254, 904L, TITANIUM & ALL OTHER ALLOYS

We can cut from one off blanks to the largest production run for immediate or just in time deliveries.

 The overall size and opening height are larger, and the space for installation is also larger During opening and closing, the friction and abrasion of the sealing surface are larger. What’s more, at a high temperature is easy to cause the phenomenon of abrasions Generally the gate valves have two sealing surfaces, which increases the difficulties for the processing, grinding, and maintenance
It takes a longer time to open and close. Can be used in the medium to flow in two directions of the ring network pipeline, that is to say, the flow direction of the medium is not limited
When fully open, the sealing surface is less eroded by the working medium than the globe valve;
The structural length is relatively short.

Very Good 

Good / fair.

All information in our datasheet is based on approximate testing and is stated to the best of our knowledge and belief. It is presented apart from contractual obligations and does not constitute any guarantee of properties or of processing or application possibilities in individual cases.