High Carbon Chromium: the D series Round Bars
Product Description
L. V. Overseas is a worldwide recognized High Carbon Chromium: the D series – D2, D3, D6 and D7 Round Bars Importers & Exporters. L. V. Overseas has in store for his clients, a wide range of High Carbon Chromium: the D series – D2, D3, D6 and D7 Round Bars. Our ready stock of High Carbon Chromium: the D series – D2, D3, D6 and D7 Round Bars is provided in any size and length.
L. V. Overseas is an esteemed company that is pretty much engaged in giving a widespread variety of High Carbon Chromium: the D series – D2, D3, D6 and D7 Round Bars. L. V. Overseas offer the same at economical prices to their consumers. Owing to strong domain expertise in the market, L. V. Overseas offers a wide range of High Carbon Chromium: the D series – D2, D3, D6 and D7 Round Bars that is fabricated using advanced technologies. L. V. Overseas entire product range ensures seamless finishing and is abrasion-resistant. High Carbon Chromium: the D series – D2, D3, D6 and D7 Round Bars ensure high strength and are delivered within budgetary limits.
Typical Applications
-
Power Generation
-
Petrochemicals
-
Gas Processing
-
Specialty Chemicals
-
Pharmaceuticals
-
Pharmaceutical Equipment
-
Chemical Equipment
-
Sea Water Equipment
-
Heat Exchangers
-
Condensers
-
Pulp and Paper Industry
Weldability
Good
Availability
D2, D3, D6 and D7 Round Bars.
Key features
Tool steels are used for cutting, pressing, extruding, and coining of metals and other materials
Cut to size capability
We can cut from one off blanks to the largest production run for immediate or just in time deliveries.
Corrosion Resistance
Very Good
Machinability
Good / fair.
Related material specifications
Grade |
D2 Steel Rods |
|---|---|
D2 Steel Square bar size |
4 to 100mm |
AISI O1 (DIN-1.2510) Hollow Bar |
32mm OD x 16mm ID to 250mm OD x 200mm ID) |
AISI 01 Tool Steel Hex Bar size |
2-100mm A/F |
D2 Steel Angle bar size |
3mm*20mm*20mm~12mm*100mm*100mm |
AISI O1 (DIN-1.2510) Rectangles Size |
33 x 30mm to 295 x 1066mm |
AISI 01 Tool Steel Flat bar size |
Thickness: 2 -100mm |
Width: 10 to 500mm |
|
D2 Steel Channel Bar |
80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
AISI O1 (DIN-1.2510) Section |
3.0 to 12.0mm thickness |
AISI 01 Tool Steel Round bar size |
Diameter: 3-~800mm |
D2 Steel Billet Size |
1/2″ to 495mm Diameter |
AISI O1 (DIN-1.2510) Round Bar Standard Dimensions |
Diameter / Height:D2 Steel Rod and Bar Sizes : 0.5 inches / 0.625 inches / 0.75 inches / 0.875 inches / 1.0 inches / 1.125 inches / 1.25 inches / 1.375 inches / 1.5 inches / 1.75 inches / 2.0 inches / 2.25 inches / 2.5 inches / 2.75 inches / 3.0 inches / 3.25 inches / 3.5 inches / 3.75 inches / 4.0 inches / 4.25 inches / 4.5 inches / 5.0 inches / 5.25 inches / 5.5 inches / 6.0 inches / 7.0 inches / 8.0 inches / 9.0 inches. |
D2 Steel Surface |
Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
AISI O1 (DIN-1.2510) Tolerance |
H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
AISI 01 Tool Steel Technique |
D2 Steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
D2 Steel Condition |
Hardened & tempered, annealed |
Finish |
Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Form |
D2 Steel Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square Bar, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Processing |
Bar cutting to 650mm |
Our D2 Steel Round bar conforms to NACE MR0175/ISO 15156 |
|
Chemical Composition (weight %)
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |