Female Tee (Round Body Socket weld) Instrumentation Fitting

Products

Product Description

Female Tee (Round Body – SW) is a kind of pipe fitting which is T-shaped has two outlets, at 90° to the connection to the main line. It is a small piece of pipe with a lateral outlet. Tee is used to attach pipelines with a pipe at a right angle with the line. Tees are extensively used as pipe fittings. They are made with a variety of materials and available in various sizes and finishes.

There are 3 female opening in a T shaped tee. There are instantly tees which have the same size openings. Reducing pipe tees contain one opening of a different size and two openings of a similar size. There are sanitary pipe tees which are used in ravage lines. This kind of tees contains a curved branch which is designed for a fresh out plug. They are used to stop obstruction of waste. A cross pipe tee has 4 equal sized female openings. A wing pipe tees have lugs to fasten the fitting to a wall or stud. A compression pipe tee uses density fittings on two or more ends. A test pipe tee has a threaded opening. This opening is used in combination with a threaded plug for a clean-out opportunity on a drain pipe.

Typical Applications

  • food and food processing industries.

  • sewage and water treatment plants.

  • risers for oil platforms and pipelines.

  • ships and marine equipment.

  • pharmaceutical industry.

Weldability

Good 

Availability

Key features

  • Nice corrosion resistance

  • Good abrasion resistance

  • Low magnetism

  • Long working life 

Corrosion Resistance

Very Good 

Machinability

Good / fair.

Female Tee (Round Body Socket weld) Instrumentation Fitting specifications

Pressure Ratings : Up to 11 000 psig (760 bar),
Medium-Pressure – Up to 20 000 psig (1378 bar)
High-Pressure – Up to 60 000 psig (4134 bar).

Types : NPT, ISO/BP, SAE/MS, AN, weld ends

Sizes : 1/16 to 2 in.; 2 to 50 mm,
Medium-Pressure – 1/4, 3/8, 1/2, 9/16, 3/4, 1 in.; 6, 10, 12 mm
High-Pressure – 1/8 to 9/16 in.

Temperature Ratings : Up to 1000°F (537°C)

Chemical Composition (weight %)

C Si Mn P S Tensile strength
kg/mm²		 Yield point
kg/mm²		 Elongation%
0.25
or
less		 0.35
or
less		 0.30
0.90		 0.040
or
less		 0.040
or
less		 52 up 39 up 15 up
38 up 22 up 30 up

Mechanical Properties

Grades Delivery Conditions Tensile Strength Rm (Mpa) Elongation in the longitudinal direction Al (%)
St 45 +A (GBK) 390 min 21 min
St 52 +A (GBK) 490 min 22 min
E355 +A (GBK) 450 min 22 min
1020 +A (GBK) 390 min 21 min

All information in our datasheet is based on approximate testing and is stated to the best of our knowledge and belief. It is presented apart from contractual obligations and does not constitute any guarantee of properties or of processing or application possibilities in individual cases. Our
warranties and liabilities are stated exclusively in our terms of trading.