Female (Round Body TH) Instrumentation Fitting
Product Description
Female Tee (Round Body – SW) is a kind of pipe fitting which is T-shaped has two outlets, at 90° to the connection to the main line. It is a small piece of pipe with a lateral outlet. Tee is used to attach pipelines with a pipe at a right angle with the line. Tees are extensively used as pipe fittings. They are made with a variety of materials and available in various sizes and finishes.
There are 3 female opening in a T shaped tee. There are instantly tees which have the same size openings. Reducing pipe tees contain one opening of a different size and two openings of a similar size. There are sanitary pipe tees which are used in ravage lines. This kind of tees contains a curved branch which is designed for a fresh out plug. They are used to stop obstruction of waste. A cross pipe tee has 4 equal sized female openings. A wing pipe tees have lugs to fasten the fitting to a wall or stud. A compression pipe tee uses density fittings on two or more ends. A test pipe tee has a threaded opening. This opening is used in combination with a threaded plug for a clean-out opportunity on a drain pipe.
Typical Applications
-
food and food processing industries.
-
sewage and water treatment plants.
-
risers for oil platforms and pipelines.
-
ships and marine equipment.
-
pharmaceutical industry.
Weldability
Good
Availability
Key features
-
Nice corrosion resistance
-
Good abrasion resistance
-
Low magnetism
-
Long working life
Corrosion Resistance
Very Good
Machinability
Good / fair.
Female (Round Body TH) Instrumentation Fitting specifications
Pressure Ratings : Up to 11 000 psig (760 bar),
Medium-Pressure – Up to 20 000 psig (1378 bar)
High-Pressure – Up to 60 000 psig (4134 bar).
Types : NPT, ISO/BP, SAE/MS, AN, weld ends
Sizes : 1/16 to 2 in.; 2 to 50 mm,
Medium-Pressure – 1/4, 3/8, 1/2, 9/16, 3/4, 1 in.; 6, 10, 12 mm
High-Pressure – 1/8 to 9/16 in.
Temperature Ratings : Up to 1000°F (537°C)
Chemical Composition (weight %)
| C | Si | Mn | P | S | Tensile strength kg/mm² |
Yield point kg/mm² |
Elongation% |
| 0.25 or less |
0.35 or less |
0.30 0.90 |
0.040 or less |
0.040 or less |
52 up | 39 up | 15 up |
| 38 up | 22 up | 30 up |
Mechanical Properties
| Grades | Delivery Conditions | Tensile Strength Rm (Mpa) | Elongation in the longitudinal direction Al (%) |
| St 45 | +A (GBK) | 390 min | 21 min |
| St 52 | +A (GBK) | 490 min | 22 min |
| E355 | +A (GBK) | 450 min | 22 min |
| 1020 | +A (GBK) | 390 min | 21 min |