Equal Tee Instrumentation Fitting

Products

Product Description

We know that pipe tees are used widely into the piping systems for transporting of the two-phase fluid mixture and two types of equals are available like the unequal and equal tee. When the branch size is same as header pipes, equal tees are used there and when the size of the branch is less than of the header sizes, the reduced tees are used. L. V. Overseas is a top leading manufacturer, supplier, and exporter of the quality of equal tee in a variety of dimensions and shapes. Depending on the needs of manufacture, the tees are manufactured and provided in custom made specifications. They are providing the product at market leading rates.

There are many good appreciating qualities found in the product quality that has resulted in making it high in demand. Those are good dimensional accuracy, high tensile strength, flexibility, long-lasting, durability, rugged construction, fine surface finishes etc. It too holds stress corrosion cracking, oxidation, pitting, crevice corrosion, and general corrosion resistance.

Typical Applications

  • food and food processing industries.

  • sewage and water treatment plants.

  • risers for oil platforms and pipelines.

  • ships and marine equipment.

  • pharmaceutical industry.

Equal Tee Instrumentation Fitting specifications

Pressure Ratings : Up to 11 000 psig (760 bar),
Medium-Pressure – Up to 20 000 psig (1378 bar)
High-Pressure – Up to 60 000 psig (4134 bar).

Types : NPT, ISO/BP, SAE/MS, AN, weld ends

Sizes : 1/16 to 2 in.; 2 to 50 mm,
Medium-Pressure – 1/4, 3/8, 1/2, 9/16, 3/4, 1 in.; 6, 10, 12 mm
High-Pressure – 1/8 to 9/16 in.

Temperature Ratings : Up to 1000°F (537°C)

Availability

Key features

  • Nice corrosion resistance

  • Good abrasion resistance

  • Low magnetism

  • Long working life 

Cut to size capability

We can cut from one off blanks to the largest production run for immediate or just in time deliveries.

Corrosion Resistance

Very Good 

Machinability

Good / fair.

Weldability

Good 

Chemical Composition (weight %)

C Si Mn P S Tensile strength
kg/mm²		 Yield point
kg/mm²		 Elongation%
0.25
or
less		 0.35
or
less		 0.30
0.90		 0.040
or
less		 0.040
or
less		 52 up 39 up 15 up
38 up 22 up 30 up

All information in our datasheet is based on approximate testing and is stated to the best of our knowledge and belief. It is presented apart from contractual obligations and does not constitute any guarantee of properties or of processing or application possibilities in individual cases. Our
warranties and liabilities are stated exclusively in our terms of trading.