Branch Tee (Round Body SW) Instrumentation Fitting
Product Description
Branch Tee (Round Body – SW) fitting is used in pipe systems to attach the straight pipe or tubing sections, adapt to the same sizes or shapes and for other purposes, such as regulating (or measuring) fluid flow. A tee pipe fitting with female connection on the two directly ends with a male connection on the branch. A tee is the most common pipe fitting for used to combine (or divide) fluid flow. It is accessible with female thread sockets, solvent-weld sockets or different solvent-weld sockets and a female-threaded side outlet.
Tees can attach pipes of different diameters or alter the direction of a pipe run, or both. These brass tees are obtainable in various connection types for your exact purpose. They can help give leak tight seals in gas or liquid service. Designed with 4:1 protection factor with respect to working pressure capabilities of the tubing used. Compression design allows simple assembly. Use in refineries, chemical processing, authority generation, and impulse lines.
Typical Applications
-
food and food processing industries.
-
sewage and water treatment plants.
-
risers for oil platforms and pipelines.
-
ships and marine equipment.
-
pharmaceutical industry.
Weldability
Good
Related material specifications
Bore diameter: 28mm to 900 mm. Internal Diameter Accuracy: H7,H8,H9. Internal Roughness: RA 0.1Mu m – RA 0.2Mu m.
Availability
Key features
-
Nice corrosion resistance
-
Good abrasion resistance
-
Low magnetism
-
Long working life
Corrosion Resistance
Very Good
Machinability
Good / fair.
Branch Tee (Round Body SW) Instrumentation Fitting specifications
Pressure Ratings : Up to 11 000 psig (760 bar),
Medium-Pressure – Up to 20 000 psig (1378 bar)
High-Pressure – Up to 60 000 psig (4134 bar).
Types : NPT, ISO/BP, SAE/MS, AN, weld ends
Sizes : 1/16 to 2 in.; 2 to 50 mm,
Medium-Pressure – 1/4, 3/8, 1/2, 9/16, 3/4, 1 in.; 6, 10, 12 mm
High-Pressure – 1/8 to 9/16 in.
Temperature Ratings : Up to 1000°F (537°C)
Chemical Composition (weight %)
| C | Si | Mn | P | S | Tensile strength kg/mm² |
Yield point kg/mm² |
Elongation% |
| 0.25 or less |
0.35 or less |
0.30 0.90 |
0.040 or less |
0.040 or less |
52 up | 39 up | 15 up |
| 38 up | 22 up | 30 up |
Mechanical Properties
| Grades | Delivery Conditions | Tensile Strength Rm (Mpa) | Elongation in the longitudinal direction Al (%) |
| St 45 | +A (GBK) | 390 min | 21 min |
| St 52 | +A (GBK) | 490 min | 22 min |
| E355 | +A (GBK) | 450 min | 22 min |
| 1020 | +A (GBK) | 390 min | 21 min |